Marlin 795 Rifle - Range Report With Intensity Scope Installed

Range Trip - (ati stock, caldwell nxt rest, various ammo, new Intensity 4-12x44mm AO scope and one piece mount)

My recent trip to the range with the Marlin 795 confirmed that there is no way the new one piece scope mount will be moving anytime soon. The scope mount probably would be secure without the extra loctite blue I added but it's just added insurance at this point. Others that were using two piece mounts have experienced the mount moving after shooting hundreds of rounds. I ensured that the mount and the receiver were cleaned of all oils and grime using Gun Scrubber and a rag. I furthermore added a few drops of Loctite Blue to the inside left of the actual mount and also to the threads of the 5 mount screws.


I started the target at 25yards, to make the zeroing of the scope easier. Prior to arriving I had the scope elev and windage all set as close to the middle as possible. The scope needed a lot of up elevation clicks (50+) and a little right adjustment. Because of the various heights of the shooting benches, I struggled with the rest that I purchased. It was too tall, and I couldn't use the rear rest at any point and was fighting the front rest for a comfortable position. I had to many variables I was playing with. New rifle, stock, mount, scope, and way to many varieties of ammo (cci blazer, rem gold, rem sub, win 333, eley). I had a bunch of FailureToFire, FailedToEjects, and more through approx 250 rounds. Most can probably be due to a newer rifle settling in and some of the subsonic ammo I was cycling through it.

Between 25 to 50 yards no adjustment, 100 yards need a lot of up elevation, I think 25+ clicks on the already 50+ clicks added at 25 yards.. I ran out of sunlight so I never finished all that I wanted at the range that day. What I thought was a powerful scope at first at 12x quickly looks small at longer distances when trying to hit the paper targets. I'm adding 2 small strips of electrical tape to the inside of the rear scope ring to gain back some elevation clicks. I didn't want to remove the scope mount and add shims underneath the mount after securing it so well. We'll see how it works on my next trip to the range.

I see a lot room for improvement in my shooting and perhaps now that I'm finished inhaling all these paint fumes I can concentrate I why I purchased the rifle in the first place,   ... to shoot the darn thing :)

1.) orig stock just painted 2.) 25yard second target sighting in

CLICK HERE TO CONTINUE READING!

Marlin 795 Rifle Scope - Intensity 4-12x44mm AO unboxed

Here is the Intensity 4-12x44mm AO scope that is going on my Marlin 795. I am mounting it using a One Piece Mount that will be extremely secure and prevent and scope movement. The scope mount rings you see in the pics below are going on another rifle, and it's a bolt-action unlike the Marlin 795 semi-automatic.




** Updated Pics - Intensity Scope Installed the Marlin 795 **

CLICK HERE TO CONTINUE READING!

Marlin 795 Rifle - Value .22LR plinker fun

I started modifying the Marlin 795 later in the afternoon and just brought the ATI Fiberforce stock inside from recent painting since its warmer then my garage and I wanted to see it installed. I didn't receive my scope this week as I thought I would so that will go on next week. I also just received my Caldwell NXT rest the other day. I am going to go ahead and bring the Marlin to the range tomorrow for kicks and test out the iron sights. My rear sight was installed crooked, looking down sights it is way to the right. Very tiny rifle compared to my old bolt action. Looking forward to tomorrow!

I also used the Krylon Camouflage paints (khaki, olive, brown) ... forgot to add that I used Krylon Matte clear on top of the paint in hopes of added durability.







Here are few pictures of the ATI Fiberforce stock modification using a Dremel and high speed cutter bit. Since it wasn't made for the Marlin 795 you have to remove the section in (pic 2) to fit the magazine. And also on the bottom of the stock you must remove a little of the stock to make a recessed area to fit the Marlin 795 trigger guard (pic 3)


Pic 1

Pic 2

Pic 3

Pic 4

Overall a fairly easy task to adapt the Ati Fiberforce stock to a Marlin 795 and might be worth a little coin and effort to experience a different feel for the rifle.

CLICK HERE TO CONTINUE READING!