Comments for Jasonweb.net

Comment on Parkzone P47 Thunderbolt Build Mods by Jasonweb

Jasonweb — Tue, 31 Jan 2012 02:18:14 +0000

Brandon-
Congrats on choosing the Parkzone P47 and opting to build the plane with your own items. The aileron servos indeed need a servo extension wire. I had whatever I had on hand at the time but a 3-6″ extension should work fine. In a pinch I’ve soldered my own servo extensions with left over servo wire but having them on hand is less hassle. Good luck with your build you’ll love the way the P47 flies and lands!

Jason

Comment on Parkzone P47 Thunderbolt Build Mods by Brandon

Brandon — Wed, 25 Jan 2012 04:29:34 +0000

im trying to imitate your build…..i have everything but the motor and servos…..im looking into a turnigy motor a g15 has similar specs to your tacon….also the servos….do i need anything special besides the obvious digital 9g…..do the cord for ailerons need to be longer than normal….still new to all of this but really like you site has inspired me…lol thanks in advance for reading!

Brandon

Comment on Marlin 795 Rifle – Range Report With Intensity Scope Installed by Jasonweb

Jasonweb — Mon, 12 Dec 2011 20:36:26 +0000

Sorry for delay. Yes the stock needs to be slightly modified using a dremel tool. Easy process so do not let this prevent you from purchasing the stock.

Comment on Marlin 795 Rifle – Range Report With Intensity Scope Installed by evan

evan — Fri, 25 Nov 2011 07:26:49 +0000

hey, i see you put the ati stock on a marlin 795. all the sellers say you cant use it on the rifle? i dont see why not,did you have to do anything to it?

Comment on Parkzone Stryker Mods Continued 4s And 60a ESC by Dan

Dan — Fri, 15 Jul 2011 01:45:17 +0000

Your website and write up on the stryker was very helpful and informative. Thanks!

Comment on 48″ Red Eagle Happy EPP 3D Plane by Jasonweb

Jasonweb — Sun, 12 Jun 2011 16:04:58 +0000

Hey Batman6583!

The inside diameter of the carbon wing spar was smaller than the replacement I purchased (7mm). I cannot recall the exact measurement. The (2) wing spars included are hollow and very strong and shouldn’t have to be reinforced with solid carbon rods placed into them. My balsa 3d planes also have the carbon tubes for a wing spar and they experience higher loads on the wings.

If you install a carbon rod down the aluminum, and you happen to tweak the fuselage a little bit by bending it, it will be difficult to flex it back in the other direction due to the installed carbon. Will the carbon tube prevent the fuselage from flexing at all in a crash? Not sure, but in the unlikely event you need to straighten the fuselage a little it will hinder the bend angle needed. I would just fly it as it is and if you damage the Happy to the point were the aluminum tube is crushed bend it back and at that point perhaps install the carbon.

I hope the build goes well and also the maiden. If you decide to build with the carbon reinforcements I’d like to hear how it went and your experience with it.

Jason

Comment on 48″ Red Eagle Happy EPP 3D Plane by Batman6583

Batman6583 — Sat, 11 Jun 2011 23:48:33 +0000

I just bought it the other day. It is being shipped as we speak. I can’t wait to see it. Richard, Hope your build went well. Dania Florida here, Winds have also been crazy over here jasonweb I have all the accessories now and just can’t wait for 6-16-11

ESC Towerpro h40a
MonsterPower 10 (1100kv) 375 watt
Four Hobby King 15158A Digital BB/Coreless Mini Servo 25 gr.
11.1v 2200mah 35C EZ FLITE Lipo Battery

I plan on strengthened the wing carbon rods by epoxying smaller rods inside so they are no longer hollow.

I also plan on strengthened the rectangular aluminum fuselage tube, by installing a carbon rod down the inside of this tube, epoxied in.

can someone tell me what size carbon rods I will need

Thanks

Comment on 48″ Red Eagle Happy EPP 3D Plane by Jasonweb

Jasonweb — Wed, 08 Jun 2011 20:36:22 +0000

Richard,
Hope your build went well and your flying the heck out of the Red Eagle. Winds have been crazy over here in California this whole year so my Red Eagle has seen limited time in the air. Hope Florida is treating you better and allows for more flight time with your planes!

Comment on 48″ Red Eagle Happy EPP 3D Plane by Richard Parker

Richard Parker — Mon, 18 Apr 2011 19:07:38 +0000

Good info,

Mine just arrived, plan to build this holiday weekend and maiden. Thank’s for the heads up for the tail wing look’s like we will be flying simialr power plant I may upgrade from the get go. Plan on 950 kv 60amp esc 13×6 prop I am going to make my own aluminum landing gear, bolt thru the aluminum stabelizer let you know how it flie’s, thank’s. grass field at our club, Buckingham rc flyer’s Florida.

Comment on RC Video Using Keychain Camera – Parkzone Radian Flight by Jasonweb

Jasonweb — Mon, 24 Jan 2011 23:30:13 +0000

Hey Dan,

I’m pretty certain the video footage on this page with the Radian was done with the camera on the LEFT WING looking straight ahead.